Clutch disc is an important part of the transmission system. Generally speaking, the service life of the clutch is the same as the service life of the car. The clutch disc is a composite material whose main function is friction.
Therefore, due to friction, losses will naturally occur, and the service life of the clutch disc is also here. How long can the life of the clutch disc reach? There is no clear answer, because the use environment of a car will cause different levels of wear.
The clutch is a mechanism that uses two clutch friction plates with flat surfaces to be compressed and released axially to carry out transmission force.
The greater the axial pressure of its two clutch plates, the greater the friction force generated, and the smoother and normal the operation transmitted to the extruder.
Under normal operating conditions, it generally shows that the machine runs smoothly and is noise-free; the clutch plate will not slip, jam, or detach by itself under rated load.
At the same time, after the clutch plates are separated, they should be completely separated to stop the brick machine from running without causing other noise or incomplete separation of the two clutch plates.
Therefore, it is necessary to adjust the clearance of the clutch plates in the clutch. Large clearances will cause the clutch plates to slip and damage the clutch plates, and small clearances will make the clutch plates difficult to separate.
Product Name | Clutch Disc |
Part Number | WG9921161100 |
Applicable Model | HOWO, A7 ,T7H ,STYER ,MAN, SHACMAN, FAW, BEIBEN |
Package | Standard brand packing & Wooden Case Package & Customized |
Delivery Time | Within 3 working days after payment |
Port | Any China Port. |
Payment Terms | T/T, L/C, Western Union |
Clutch disc is a composite material with friction as its main function and structural performance requirements. Friction materials for automobiles are mainly used to manufacture brake friction plates and clutch plates.
These friction materials mainly use asbestos-based friction materials. With the increasing requirements for environmental protection and safety, semi-metallic friction materials, composite fiber friction materials, and ceramic fiber friction materials have gradually appeared.
Since friction materials are mainly used in the manufacture of parts for the brake system and drive train in automobiles, it is required to have a sufficiently high and stable friction coefficient and good wear resistance.
Quantity(Pieces) | 1 - 100000 | >100000 |
Est. Time(days) | 30 | To be negotiated |